In this chapter, we will understand how the vi Editor works in Unix. There are many ways to edit files in Unix. Editing files using the screen-oriented text editor vi is one of the best ways. This editor enables you to edit lines in context with other lines in the file.
An improved version of the vi editor which is called the VIM has also been made available now. Here, VIM stands for Vi IMproved.
vi is generally considered the de facto standard in Unix editors because −
Following is an example to create a new file testfile if it already does not exist in the current working directory −
You now have one open file to start working on. Before proceeding further, let us understand a few important concepts.
Hint − If you are not sure which mode you are in, press the Esc key twice; this will take you to the command mode. You open a file using the vi editor. Start by typing some characters and then come to the command mode to understand the difference.
The command to save the contents of the editor is :w. You can combine the above command with the quit command, or use :wq and return.
The easiest way to save your changes and exit vi is with the ZZ command. When you are in the command mode, type ZZ. The ZZ command works the same way as the :wq command.
If you want to specify/state any particular name for the file, you can do so by specifying it after the :w. For example, if you wanted to save the file you were working on as another filename called filename2, you would type :w filename2 and return.
The following points need to be considered to move within a file −
As mentioned above, most commands in vi can be prefaced by the number of times you want the action to occur. For example, 2x deletes two characters under the cursor location and 2dd deletes two lines the cursor is on.
It is recommended that the commands are practiced before we proceed further.
These two commands differ only in the direction where the search takes place −
The character search searches within one line to find a character entered after the command. The f and F commands search for a character on the current line only. f searches forwards and F searches backwards and the cursor moves to the position of the found character.
The t and T commands search for a character on the current line only, but for t, the cursor moves to the position before the character, and T searches the line backwards to the position after the character.
For example, if you want to check whether a file exists before you try to save your file with that filename, you can type :! ls and you will see the output of ls on the screen.
You can press any key (or the command's escape sequence) to return to your vi session.
An improved version of the vi editor which is called the VIM has also been made available now. Here, VIM stands for Vi IMproved.
vi is generally considered the de facto standard in Unix editors because −
- It's usually available on all the flavors of Unix system.
- Its implementations are very similar across the board.
- It requires very few resources.
- It is more user-friendly than other editors such as the ed or the ex.
Starting the vi Editor
The following table lists out the basic commands to use the vi editor −| S.No. | Command & Description |
|---|---|
| 1 |
vi filename Creates a new file if it already does not exist, otherwise opens an existing file. |
| 2 |
vi -R filename Opens an existing file in the read-only mode. |
| 3 |
view filename Opens an existing file in the read-only mode. |
$vi testfileThe above command will generate the following output −
| ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ "testfile" [New File]You will notice a tilde (~) on each line following the cursor. A tilde represents an unused line. If a line does not begin with a tilde and appears to be blank, there is a space, tab, newline, or some other non-viewable character present.
You now have one open file to start working on. Before proceeding further, let us understand a few important concepts.
Operation Modes
While working with the vi editor, we usually come across the following two modes −- Command mode − This mode enables you to perform administrative tasks such as saving the files, executing the commands, moving the cursor, cutting (yanking) and pasting the lines or words, as well as finding and replacing. In this mode, whatever you type is interpreted as a command.
- Insert mode − This mode enables you to insert text into the file. Everything that's typed in this mode is interpreted as input and placed in the file.
Hint − If you are not sure which mode you are in, press the Esc key twice; this will take you to the command mode. You open a file using the vi editor. Start by typing some characters and then come to the command mode to understand the difference.
Getting Out of vi
The command to quit out of vi is :q. Once in the command mode, type colon, and 'q', followed by return. If your file has been modified in any way, the editor will warn you of this, and not let you quit. To ignore this message, the command to quit out of vi without saving is :q!. This lets you exit vi without saving any of the changes.The command to save the contents of the editor is :w. You can combine the above command with the quit command, or use :wq and return.
The easiest way to save your changes and exit vi is with the ZZ command. When you are in the command mode, type ZZ. The ZZ command works the same way as the :wq command.
If you want to specify/state any particular name for the file, you can do so by specifying it after the :w. For example, if you wanted to save the file you were working on as another filename called filename2, you would type :w filename2 and return.
Moving within a File
To move around within a file without affecting your text, you must be in the command mode (press Esc twice). The following table lists out a few commands you can use to move around one character at a time −| S.No. | Command & Description |
|---|---|
| 1 |
k Moves the cursor up one line |
| 2 |
j Moves the cursor down one line |
| 3 |
h Moves the cursor to the left one character position |
| 4 |
l Moves the cursor to the right one character position |
- vi is case-sensitive. You need to pay attention to capitalization when using the commands.
- Most commands in vi can be prefaced by the number of times you want the action to occur. For example, 2j moves the cursor two lines down the cursor location.
Control Commands
The following commands can be used with the Control Key to performs functions as given in the table below −Editing Files
To edit the file, you need to be in the insert mode. There are many ways to enter the insert mode from the command mode −| S.No. | Command & Description |
|---|---|
| 1 |
i Inserts text before the current cursor location |
| 2 |
I Inserts text at the beginning of the current line |
| 3 |
a Inserts text after the current cursor location |
| 4 |
A Inserts text at the end of the current line |
| 5 |
o Creates a new line for text entry below the cursor location |
| 6 |
O Creates a new line for text entry above the cursor location |
Deleting Characters
Here is a list of important commands, which can be used to delete characters and lines in an open file −| S.No. | Command & Description |
|---|---|
| 1 |
x Deletes the character under the cursor location |
| 2 |
X Deletes the character before the cursor location |
| 3 |
dw Deletes from the current cursor location to the next word |
| 4 |
d^ Deletes from the current cursor position to the beginning of the line |
| 5 |
d$ Deletes from the current cursor position to the end of the line |
| 6 |
D Deletes from the cursor position to the end of the current line |
| 7 |
dd Deletes the line the cursor is on |
It is recommended that the commands are practiced before we proceed further.
Change Commands
You also have the capability to change characters, words, or lines in vi without deleting them. Here are the relevant commands −| S.No. | Command & Description |
|---|---|
| 1 |
cc Removes the contents of the line, leaving you in insert mode. |
| 2 |
cw Changes the word the cursor is on from the cursor to the lowercase w end of the word. |
| 3 |
r Replaces the character under the cursor. vi returns to the command mode after the replacement is entered. |
| 4 |
R Overwrites multiple characters beginning with the character currently under the cursor. You must use Esc to stop the overwriting. |
| 5 |
s Replaces the current character with the character you type. Afterward, you are left in the insert mode. |
| 6 |
S Deletes the line the cursor is on and replaces it with the new text. After the new text is entered, vi remains in the insert mode. |
Copy and Paste Commands
You can copy lines or words from one place and then you can paste them at another place using the following commands −| S.No. | Command & Description |
|---|---|
| 1 |
yy Copies the current line. |
| 2 |
yw Copies the current word from the character the lowercase w cursor is on, until the end of the word. |
| 3 |
p Puts the copied text after the cursor. |
| 4 |
P Puts the yanked text before the cursor. |
Advanced Commands
There are some advanced commands that simplify day-to-day editing and allow for more efficient use of vi −Word and Character Searching
The vi editor has two kinds of searches: string and character. For a string search, the / and ? commands are used. When you start these commands, the command just typed will be shown on the last line of the screen, where you type the particular string to look for.These two commands differ only in the direction where the search takes place −
- The / command searches forwards (downwards) in the file.
- The ? command searches backwards (upwards) in the file.
| S.No. | Character &Description |
|---|---|
| 1 |
^ Searches at the beginning of the line (Use at the beginning of a search expression). |
| 2 |
. Matches a single character. |
| 3 |
* Matches zero or more of the previous character. |
| 4 |
$ End of the line (Use at the end of the search expression). |
| 5 |
[ Starts a set of matching or non-matching expressions. |
| 6 |
< This is put in an expression escaped with the backslash to find the ending or the beginning of a word. |
| 7 |
> This helps see the '<' character description above. |
The t and T commands search for a character on the current line only, but for t, the cursor moves to the position before the character, and T searches the line backwards to the position after the character.
Set Commands
You can change the look and feel of your vi screen using the following :set commands. Once you are in the command mode, type :set followed by any of the following commands.| S.No. | Command & Description |
|---|---|
| 1 |
:set ic Ignores the case when searching |
| 2 |
:set ai Sets autoindent |
| 3 |
:set noai Unsets autoindent |
| 4 |
:set nu Displays lines with line numbers on the left side |
| 5 |
:set sw Sets the width of a software tabstop. For example, you would set a shift width of 4 with this command — :set sw = 4 |
| 6 |
:set ws If wrapscan is set, and the word is not found at the bottom of the file, it will try searching for it at the beginning |
| 7 |
:set wm If this option has a value greater than zero, the editor will automatically "word wrap". For example, to set the wrap margin to two characters, you would type this: :set wm = 2 |
| 8 |
:set ro Changes file type to "read only" |
| 9 |
:set term Prints terminal type |
| 10 |
:set bf Discards control characters from input |
Running Commands
The vi has the capability to run commands from within the editor. To run a command, you only need to go to the command mode and type :! command.For example, if you want to check whether a file exists before you try to save your file with that filename, you can type :! ls and you will see the output of ls on the screen.
You can press any key (or the command's escape sequence) to return to your vi session.
Replacing Text
The substitution command (:s/) enables you to quickly replace words or groups of words within your files. Following is the syntax to replace text −:s/search/replace/gThe g stands for globally. The result of this command is that all occurrences on the cursor's line are changed.
Important Points to Note
The following points will add to your success with vi −- You must be in command mode to use the commands. (Press Esc twice at any time to ensure that you are in command mode.)
- You must be careful with the commands. These are case-sensitive.
- You must be in insert mode to enter text.
No comments:
Post a Comment